How to Get Kaspersky license forever

1) First of all delete the existing key if you have.

2) Go to Setting, then select Option, Uncheck the "Enable Self Defense" and click OK.

3) Now right-click the kaspersky icon from taskbar and click on "Exit".

4) You will get a promt like this . Click "Yes".

5) Now goto run and type in "regedit".

6) Now goto HKEY_LOCAL_MACHINE ---->SOFTWARE ---->KASPERSKYLAB ---->PROTECTED ---->AVP9 ---->ENVIRONMENT .

7) Now in the right hand side you can see PCID. Double click it and change the last two values before the flower bracket and click ok.eg:- The last two values are "D7"... So i change it to "F9"...

8) Now open kaspersky again.

9) Select "Activate Trial License" and click next.

10) Now enable Self-Defence and you are good to go

continue reading

BEST THOUGHTS

Define Birthday?

The only day in Ur life, when U CRIED, Ur MOTHER was SMILING.


         courtesy (BBC, answer by A P J ABDUL KALAM to a question asked in BBC)

continue reading

Install Windows 7 From USB Drive

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.

The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file.and finally restart your computer. See how we installed Ubuntu from USB using UNetbootin here.

Before you begin, you will require the following:

• USB Flash Drive (4GB minimum)
• Windows 7 ISO Image file
• UNetbootin

Note: If UNetbootin doesn’t work, try out the Microsoft’s official tool called Windows 7 USB/DVD Tool.

Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.

Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time(10-15 minutes), so have patience.

Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button(usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu. Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.

NOTE:If you got any problem in following this guide feel free to ask questions by leaving comment.

In the next step, select the Type of installation, in our case it is USB Drive. Once done, click OK and it will begin extracting and copying the files to the USB Drive.

Note: You should have a USB Drive with a minimum 1GB of free memory.

Once the installation is complete, it will ask you to restart the computer. Click Reboot Now to restart your system.

Now while your system is starting up press the appropriate button(usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu. Now change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart thesystem. Now you will have Ubuntu running from USB drive.

Note: If you get ‘BOOTMGR is missing’ error, then this fix will help.

continue reading

HOW CAN MAKE BOOTABLE USB

This guide works 100% for Windows 7 and Windows 8 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide to install Windows 7.from USB flash drive.

I just did this method on one of my friends machine and installed Windows 7 and Windows 8 . The main advantage is that by using USB drive you will be able to install Windows 7 or Windows 8 in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Windows 8 installation files.

Follow the below steps to create bootable Windows 7/Windows 8 USB drive using which you can install Windows 7 or Windows 8 easily.

Procedure:

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

5. Next insert your Windows7/Windows 8 DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7 or Windows 8. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

    More...... Click the name(Red)   JERRIN JAMES

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

continue reading